免费看国产一级片,日本在线xxx,国产精品秘入口18禁麻豆免会员

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-8MB-LJS	2000×2000×2000	Subject to contractual three-view
LRHS-15MB-LJS	2500×3000×2000
LRHS-30MB-LJS	3000×5000×2000
LRHS-60MB-LJS	5000×6000×2000

temperature range	A：-20℃～100℃? ? B：-40℃～100℃ C：-60℃～100℃? ? D：-70℃～100℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time setting range	1～60000M
Humidity range	30%～98% RH
Humidity uniformity	+2% -3% RH
Humidity fluctuations	±2%
Heating rate	-40℃～100℃≤90min
cooling rate	100℃～-40℃≤90min
Outer box material	High-quality library board, CNC finishing
?Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature and humidity controller	Japan “UEC” temperature and humidity meter
Temperature and humidity sensors	PT100 platinum resistance temperature measurement body
Cooling method	Single or double cascade refrigeration
compactors	France Tycon/Germany BITZER/Germany Gulen
standard configuration		Wet bulb gauze, emergency stop switch, three-color indicator light
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overload and short-circuit protection for the whole machine, under-phase/reverse-phase, timing of the whole equipment, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		(A) 20.0kW/31.0kW 48.0kW/60.0kW (B) 25.0kW/38.5kW 55.0kW/72.0kW (C) 34.5kW/48.5kW 62.5kW/80.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard walk-in temperature and humidity chamber etc 3、This technical information, subject to change without notice

Industry News

What Are the Differences in Performance of Different High and Low Temperature Alternating Test Chambers?

The primary purpose of high and low temperature alternating test chambers is to assess the adaptability of products and determine their performance under various environmental conditions

The Differences Between a Walk-In Dust and Sand Test Chamber and an IP56X Dust and Sand Chamber

Walk-in dust and sand test chambers are designed to simulate natural sandstorm conditions to test the protective performance of large equipment, while IP56X dust and sand chambers focus on shell sealing detection and are suitable for small and medium-sized electronic and electrical products.

Technical Specification and Key Control Points for the Installation of Salt Fog Chambers (Applicable to the pre-deployment of precision environmental simulation test equipment)

The salt fog chamber is the core instrument for evaluating the corrosion resistance of materials and protective coatings. Its measurement repeatability and reproducibility are directly affected by installation quality.

免费无码中文字幕A级毛片_人妻少妇久久中文字幕一区二区_亚洲乱码中文字幕综合_亚洲va中文字幕无码久久

Walk-in Temperature and Humidity Chamber