最近最新中文字幕,中文字幕在线观看亚洲日韩,中文字幕精品无码久久久久久3D日动漫

Product Features

Product application:
The photovoltaic wet freezing test chamber is suitable for PV modules (solar panels) to conduct thermal cycling, wet-freeze cycling, and dual 85 tests (high temperature and high humidity).

It is used to confirm whether the modules can withstand the negative temperature effects following high temperature and high humidity conditions, as well as the fatigue and thermal failure caused by repeated temperature changes.

Additionally, it determines the thermal stress generated when PV modules are exposed to high humidity and their ability to resist long-term moisture penetration. This equipment is an essential testing device in the PV module industry.
Compliance with standards:
Test Methods for Module IEC 61646:

a.Thermal Cycling Test
Purpose: To determine the ability of the module to withstand thermal mismatch, fatigue, and different stresses caused by repeated temperature changes.

The module is cycled between temperatures of -40℃±2℃ and +85℃±2℃. The temperature change between the highest and lowest temperatures shall not exceed 100℃/h.

b.Damp Heat-Freeze Test
Purpose: To determine the ability of the module to withstand the effects of high temperature and high humidity, followed by sub-zero temperatures.

The module is subjected to temperature changes between +85℃ and 25℃ at a rate not exceeding 100℃/h, and between 25℃ and -40℃ at a rate not exceeding 200℃/h.

c.Damp Heat Test
Purpose: To determine the ability of the module to withstand long-term moisture penetration.
Test Temperature**: 85℃±2℃
Test Humidity**: 85%±5%
Test Duration**: 1000 hours
Control system:
The photovoltaic (PV) wet-freeze test chamber features a true-color 7.0-inch (North Carolina) TFT LCD touch screen controller with Chinese and English display options.

When setting up programs, users only need to configure the temperature and time parameters, without the need to enter additional instructions for the compressor or other components.

The PV wet-freeze test chamber has the following capabilities:

It can store 1000 programs, with each program consisting of up to 1000 steps and 100 cycles, and it also features a function to link 10 groups of programs.

It is equipped with 1 USB interface and 1 LAN communication interface, which allow users to monitor the test process and perform functions such as automatic power on and off.

It uses PID automatic calculation and FUZZY control, and it has functions for data acquisition, export, and viewing of graphs.
Refrigeration system:
The refrigeration unit of the photovoltaic wet freezing test chamber uses a fully enclosed compressor from Tecumseh, France.

(The compressor operates with automatic step control based on high and low temperature points to reduce energy consumption and extend the compressor's service life.)

Refrigerant: Non-fluorinated environmentally friendly refrigerant (Dupont R-404A, R-23 from the USA).

Condenser: Water-cooled shell and tube type (the installation of the cooling water tower and its system is to be provided by the customer).

Evaporator: Finned multi-stage evaporator with automatic load capacity adjustment.

Expansion System: A refrigeration system with capacity control using a solenoid valve and expansion valve.

Product Parameter

Model		Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-6500-LHF		1600 x 1400 x 2900 (eight components)	3900×1750×3300

temperature range	-50℃～+120℃
Temperature fluctuation	≤±0.5℃
Temperature uniformity	≤2.0℃
temperature deviation	≤±2.0℃
Humidity range	30%～98%RH
Sample Temperature Control Rate	-40°C to 0°C ≥ 3.33°C/min (linear, full load, energized) ≥ 1.66°C/min (linear, full load, energized) for the rest of the temperature range
Outer case material	High-quality cold-rolled steel plate, surface plastic spraying treatment
Inner box material	Stainless steel plate SUS304
Insulation material	Rigid polyurethane (PU) foam
controllers	Japan “UEC” brand temperature and humidity meter, 7-inch high-definition true color LCD touch screen display
Refrigeration compressors	BITZER, Germany
Cooling method	Two-machine cascade refrigeration
Temperature and humidity sensors	High Accuracy Pt100 Platinum Resistance Temperature Sensors
security protection		Compressor overpressure/overload, fan motor overload, overall equipment timing, over-temperature, water shortage, short circuit, phase loss, leakage and other protection
Supply Voltage		AC380V±10% 50Hz
Power		110.0kW
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the specific requirements of the user non-standard Photovoltaic wet freezing test chamber etc 3、This technical information is subject to change without prior notice.

Industry News

Mastering Maintenance Details to Extend the Lifespan of Thermal Shock Test Chambers

There are many details involved in maintaining thermal shock test chambers, but a few key points must be diligently followed by operators to ensure the equipment’s longevity.

The Key Role of Ozone in Ozone Aging Test Chambers

Ozone aging test chambers are indispensable instruments in the field of material anti-aging testing. Common types include ozone aging test equipment and ultraviolet aging test equipment.

Guidelines for Selecting High-Low Temperature Test Chambers ——A Systematic Decision-Making Framework for Reliability Testing

The high-low temperature test chamber is a cornerstone of environmental-reliability verification. Its mission is to reproduce extreme temperature and humidity conditions in a controlled manner so that performance degradation and failure modes of the Device Under Test (DUT) can be assessed across its life cycle.

Photovoltaic wet freezing test chamber