激情综合在线观看,日韩毛片在线免费看,国产亚洲精品网站

Product Parameter

Model

LRHS-6500-LHF

temperature range	A：-20℃~150℃? B：-40℃~150℃? C：-60℃~150℃ D：-70℃~150℃
Temperature uniformity	≤2℃(at no load)
Temperature fluctuation	≤±0.5℃(at no load)
Humidity range	20%～98% RH
Humidity uniformity	±2.5% RH
Humidity fluctuations	±2%
heating rate	1.0～3.0℃/min
cooling rate	0.7～1.0℃/min
Time Setting Range	1～60000M
test hole	Mounted on the left side of the machine for use with external test power or signal cables
viewing window	210 x 275mm or 395 x 395mm (effective field of view)
Outer case material	High quality A3 steel plate electrostatic spraying
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
refrigeration system	cascade cooling
Compressor	France Tecumseh / BITZER, Germany
standard configuration		1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection		Pressure release device, anti-spark design, smoke alarm, intake and exhaust devices, Spraying fire extinguishing device, compressor overpressure overload, fan motor overheating, the whole machine under-phase/reverse-phase Over-temperature, overall equipment timing, leakage protection, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		4.0kW/5.5kW/8.5kW/11.5kW/11.5kW
operating environment		5℃～＋28℃ ≤85% RH

Industry News

How to Purchase a Cold and Hot Shock Test Chamber That Meets Your Needs

Cold and hot shock test chambers utilize high-temperature and low-temperature zones during testing. In the testing process, two-box models involve placing the test product in high and low-temperature zones for cyclic exposure, while three-box models involve blowing high- and low-temperature gases onto the product alternately.

Editor’s Reminder: Beware of Pitfalls When Purchasing a UV Aging Test Chamber

A UV aging test chamber is used to evaluate the weather resistance of various materials under ultraviolet (UV) light conditions.

Salt Fog Test Chamber – Specification for Corrosion Resistance Evaluation

Salt fog (salt spray) test chambers are standardized instruments designed to determine the corrosion resistance of materials and their protective coatings. The test results serve as a technical basis for reliability design, quality control, and service-life prediction in industries such as electrical and electronic engineering, digital components, plastics, aerospace equipment, and many others.

免费无码中文字幕A级毛片_人妻少妇久久中文字幕一区二区_亚洲乱码中文字幕综合_亚洲va中文字幕无码久久

Battery Test Chamber