www.男人天堂网,天天想你在线观看完整版电影免费,婷婷视频在线播放

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-8MB-LD	2000×2000×2000	Subject to contractual three-view
LRHS-15MB- LD	2500×3000×2000
LRHS-30MB- LD	3000×5000×2000
LRHS-60MB- LD	5000×6000×2000

temperature range	A：-20℃～RT ? ? ?B：-40℃～RT ? ? ?C：-60℃～RT ? ? ?D：-70℃～RT
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time Setting Range	1～60000M
cooling rate	RT～-40℃≤30min
Outer case material	High-quality library board, CNC finishing
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature Controller	Imported “UEC” brand temperature and humidity meter
temperature sensor	PT100 platinum resistance temperature measurement body
Cooling method	Single or double cascade refrigeration
compactors	Tycon (France) / BITZER (Germany)
standard configuration		Emergency stop switch, three-color indicator light
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overall equipment phase/reverse phase, test timing, overload and short-circuit protection
Supply Voltage		AC380V±10% 50Hz
Power		（A）17.0kW/27.5kW/42.0kW/56.0kW （B）20.0kW/34.5kW/50.5kW/68.5kW （C）29.5kW/43.5kW/58.0kW/75.0kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard walk-in low temperature test chamber etc 3、This technical information, subject to change without notice

Industry News

Brief Introduction: Temperature and Humidity Requirements for the Three Processes of a Sand and Dust Test Chamber

When conducting tests with a sand and dust test chamber, there are primarily three processes involved. Some clients may not be familiar with these processes during initial consultations. Today, we will introduce these three processes and their corresponding temperature and humidity requirements.

UV aging test chamber needs to simulate which three environments

UV aging test chambers are designed to simulate three environmental conditions to evaluate the performance parameters of objects under ultraviolet (UV) radiation and other factors.

Key Considerations When Relocating a Thermal Shock Test Chamber

When a company changes its production location and needs to relocate a thermal shock test chamber, the following precautions must be taken to minimize potential damage to the equipment.

免费无码中文字幕A级毛片_人妻少妇久久中文字幕一区二区_亚洲乱码中文字幕综合_亚洲va中文字幕无码久久

Walk-in Low Temperature Test Chamber