<strike id="00ggy"></strike>

Search for the product you are looking for

Hot search

Constant Temperature And Humidity Test Chamber Walk-in High and Low Temperature Test Chamber

Press Enter to search

Walk-in Rain Test Chamber

Product Introduction

walk-in rain test chamber is suitable for testing the waterproof sealing of outdoor motorized trains. Through the waterproof test chamber, the water sealing status of motorized trains is confirmed by making the conditions of the rain test similar to the natural state outside, and structural improvements are made to the parts that may leak rain.

Service Hotline

4000-662-888

Location：Home > IP protection testing equipment > Walk-in Rain Test Chamber

Product Features

Product Parameter

Studio Size? (DWH)mm	7000×4000×4000（DWH）mm
Hole Diameter	Φ2.5—3.0mm
spraying density	550×550mm
water jet pressure	150±10KPa
Sprinkler Pipe Diameter	Depending on the flow rate
Pressure	Class 1.5 accuracy manometer, dial #100, 0 to 6kg/cm2, with pressure sensor
flow meter	Electromagnetic flow meter
rain gauge	Depending on the flow rate
standard configuration	Water pumps, sewage pumps, filters
shower duration	Arbitrary Adjustment
Supply Voltage	AC380V±10% 50Hz
Upper front enclosure	6mm±1mm/min
Side & Top	8mm±1mm /min
other	One IPX5, one IPX6 printhead each
Note: 1、 the above data are in the use of ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard Walk-in rain test chamber etc 3、This technical information, if there is any change without prior notice

Product Recommendation

Walk-in Low Temperature Test Chamber

Military Standard Sand and Dust Test Chamber

Walk-in Rain Test Chamber

Low Temperature Test Chamber

Military Standard Rain Test Chamber

Industry News

Have You Noticed These Points About Formaldehyde/VOC Environmental Test Chambers?

There are many important considerations when selecting and using a formaldehyde/VOC environmental test chamber. How many of these are you aware of? Today, we’ll share a few key points—have you noticed them?

What to Do If the High and Low Temperature Test Chamber Refrigerant Leaks

When a high and low temperature test chamber experiences refrigerant leakage, the following steps can be taken to address the issue

Mastering Maintenance Details to Extend the Lifespan of Thermal Shock Test Chambers

There are many details involved in maintaining thermal shock test chambers, but a few key points must be diligently followed by operators to ensure the equipment’s longevity.