www.欧美黄色,亚洲美免无码中文字幕在线,www.日本三级

Product Parameter

Model	LRHS-22.5M-QDC
Studio Size? (DWH)mm	3000mm×3000mm×2500mm(W×D×H)
Dimension（DWH）mm	3200mm×3920mm×2780mm(W×D×H) without motor height
Unit size	約2600mm×2500mm×2080mm×1 group(W×D×H) without motor height
Power Cabinet Dimensions	約1000mm×800mm×2080mm×2 group(W×D×H) without motor height
Hydrogen system sizing	約4320mm×2300mm×2080mm(W×D×H) without motor height
Air System Dimensions	約5020mm×2500mm×2080mm(W×D×H) without motor height
Power Cabinet Dimensions	約800mm×600mm×2080mm×5?group(W×D×H)

temperature range	-50℃～+100℃【Satisfy static storage requirement】. -40℃~85℃【Meets thermal load requirements, maximum 150kW heat dissipation】.
Humidity range	10%~95%RH (within the range of 10℃~85℃) [static non-thermal load]. Response time from 10% to 95% RH at 65℃ is less than 100min [Static no thermal load]. Temperature and humidity 60℃/90%RH [Thermal load 150kW].
Temperature control accuracy	≤±1℃ [when the engine is not running], ≤±3℃ [when the engine is running, maximum 150kW heat dissipation]
Temperature fluctuation	≤±0.5℃【unladen】、≤±3℃【With load 150KW]
Temperature uniformity	≤2.0℃【When the engine has no heat dissipation in the cabin】
Humidity control accuracy	±5%RH or less [unladen]
Humidity fluctuation	≤±5%RH【unladen】
heating rate	-40℃～+85℃, the average rate of the whole process is 1℃/min 【Internal 540kg electric pile, heat dissipation 150KW】.
cooling rate	+85℃～-40℃, average rate of the whole process 1℃/min [540kg electric pile placed inside, heat dissipation 150KW].
Customer Tested Products	Test Product: Metal-fueled Reactor Engine + Total Weight: 540kg + Reactor Power: 150kw
Outer case material	High-quality cold-rolled steel plate (t=1.0mm), surface electrostatic spraying treatment
Inner box material	Stainless steel plate (SUS304-CP 2B polished)
Base plate material	Non-slip stainless steel plate (SUS304) t=3.0mm welded. Base plate load requirement: more than 2T/mP2
Insulation material	150mm rigid polyurethane foam insulation layer
Lighting lamps	Explosion-proof LED light, with moisture-proof, explosion-proof, transparent, heat insulation, not easy to produce steam frost, etc.
Controller	Imported “UEC” brand temperature and humidity meter
refrigeration system	Germany “BITZER” semi-hermetic air-cooled / water-cooled compressor refrigeration mode
Temperature Controller	High Accuracy Pt100 Platinum Resistance Temperature Sensors
Humidity Sensor	Highly accurate Vaisala capacitive humidity sensors from Finland
Pressure relief hole	Equipped with an electric pressure balancing device to maintain a slightly positive pressure in the environmental chamber in the range of 0 to 50 Pa under all circumstances.
Fans	Single intake multi-blade centrifugal explosion-proof fan with adjustable frequency conversion
Secure call system	The box is equipped with a call system to facilitate the call in case of sudden emergencies, which can ensure the safety of the staff inside in emergency situations
Optional Accessories
security protection	Compressor low pressure/overload/high pressure alarm, hydrogen/oxygen/soot concentration alarm, fan overload, system abnormality alarm, emergency stop switch, water shortage, short-circuit, phase shortage, over-temperature and other protections
Supply Voltage	AC380V±10% 50Hz
Power	Maximum load capacity about 270KW, maximum current: 480A Hydrogen system power about 138KW, maximum current: 240A Air system power about 165KW, maximum current: 290A Total air switch capacity 1500A

Industry News

How to Prevent Aging Test Chambers from Generating Static Electricity

If an aging test chamber generates static electricity, it can not only affect the test results but may also cause malfunctions or even fires. So, how can we ensure that the test equipment remains free of static electricity?

Salt Fog Test Chamber – Specification for Corrosion Resistance Evaluation

Salt fog (salt spray) test chambers are standardized instruments designed to determine the corrosion resistance of materials and their protective coatings. The test results serve as a technical basis for reliability design, quality control, and service-life prediction in industries such as electrical and electronic engineering, digital components, plastics, aerospace equipment, and many others.

?Temperature Shock Test Chamber, Simulating High and Low Temperature Impact Environments on Samples or Products?

The temperature shock test chamber, also known as a thermal shock test chamber or high-low temperature impact test chamber, is a device used to simulate extreme temperature variations under controlled environmental conditions.

免费无码中文字幕A级毛片_人妻少妇久久中文字幕一区二区_亚洲乱码中文字幕综合_亚洲va中文字幕无码久久

Hydrogen Fuel Cell Test Chamber