亚洲七七久久精品中文国产,波多野结衣在线中文,欧美一级一区二区中文字幕

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-108-RFHY	450×600×400	Subject to contractual three-view
LRHS-270-RFHY	600×900×500
LRHS-412-RFHY	750×1100×500
LRHS-663-RFHY	850×1300×600
LRHS-816-RFHY	850×1600×600
LRHS-1080-RFHY	900×2000×600

temperature range	0℃～60℃
Humidity range	30%～98% RH
Saturated drum temperature	RT+10℃～70℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Salt spray deposition	1～2ml/80 cm2.h(16-hour average)
heating rate	0.5℃～1.5℃/min
cooling rate	0.5℃～1.0℃/min
Compressed air pressure	2.00±0.01（kg/cm2）
Spraying method	Continuous/periodic selectable
Specimen holder angle	Can meet 15°, 30° tilt test
Test Methods	NSS test AASS test CASS test
Case Material	PP reinforced rigid plastic sheet or 316 stainless steel
Lid Material	PP reinforced rigid plastic sheet or 316 stainless steel
Air-saturated drums	Imported high-grade stainless steel SUS304
Pressurized Air Hose Material	High quality rubber hose
Other pipelines	Thickened Fluorosilicone Rubber Tubing
Temperature Controller	Imported “UEC” brand temperature meter
Dehumidification and cooling	Single or double cascade refrigeration
Compressor	Taikang, France
temperature sensor	PT100 platinum resistance temperature measurement body
heater	Titanium Heating Tube
interrupter	Schneider miniature circuit breakers (to prevent short circuits in control circuits)
standard configuration		V-shaped sample holders, round rods, nozzles, funnels, metering cylinders, mist evacuation tubes
security protection		Over-temperature, under-phase/reverse-phase, test timer, fast mist removal indication, test end Low water level protection, leakage, short circuit, overpressure overload compressor
Supply Voltage		AC380V±10% 50Hz
Power		8.5kW/10.0kW/12.0kW/13.5kW/15.0kW/17.5kW
operating environment		5℃～＋28℃ ≤85％RH
Note: 1、 the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard cyclic salt spray corrosion test chamber etc 3、This technical information, subject to change without notice

Industry News

Have You Done Your Homework Before Purchasing a High and Low Temperature Test Chamber?

With the rapid development of China's industry, an increasing number of sectors require high and low temperature test chambers for product testing. The market offers numerous brands with varying prices and similar technical parameters.

How to Detect Leaks in a Temperature Cycling Test Chamber

Previously, we have discussed many technical aspects of temperature cycling test chambers. Today, we will share methods for detecting leaks in these chambers. Specifically, there are four main approaches to check for leaks.

Exploring the Causes of Defrosting in Thermal Shock Test Chambers

Frost formation in a thermal shock test chamber is a sublimation phenomenon where moisture inside the chamber condenses under low-temperature conditions. But why does this happen? Is it simply because the chamber temperature is too low?

Cyclic Salt Spray Corrosion Test Chamber