久久精品中文字幕一区,日韩精品中文字幕无码一区,在线看福利中文影院

Product Parameter

Model		Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-1320-PL		1600mm×2500mm×3300	約2500mm×5100mm×3563

temperature range	Water temperature +10°C
quantity of rainfall	10—15cm/h
raindrop diameter	0.5—4.5mm
Test wind speed	Horizontal wind speed 10-18m/s adjustable
raindrop angle	The raindrops have a horizontal direction to 45 ° angle change, and uniformly flutter on the side of the test piece
Intensive rainfall	This procedure may be considered when testing large specimens where rainfall and rain blowing devices cannot be used.
quantity of rainfall	2800+30L/m2/h
	Rain drops cannot be aggregated into a stream, and the dispenser distributes the drip holes in a matrix at 20-25.4mm intervals.
Rainfall distance	The drip height should ensure that the final velocity of the water drop is 9m/s
Turntable size/carrying capacity	Diameter: φ1000mm, Load: ≥50kg
Speed range	1~5r/min continuously adjustable
Workpiece size limitation	Maximum allowable size of test piece: 1000mm×1000mm×1000mm
Outer case material	High-quality library boards
Inner box material	Imported high-grade stainless steel SUS304
Insulation material	Rigid polyurethane foam
drip tray	Imported high-grade stainless steel SUS304 + aluminum plywood + aluminum profile
Controller	Taiwan “Wyland” temperature and humidity controller (7.0 inches, high-definition true color “TFT” LCD touch screen)
Heating systems	Nichrome wire heaters
temperature sensor	High Accuracy Pt100 Platinum Resistance Temperature Sensors
Wind Speed Sensor	Differential pressure air velocity sensor, 4-20mA output
security protection		Fan, motor, pump overcurrent overload protection, limit, undervoltage, short circuit, phase loss, over temperature, leakage protection
Supply Voltage		AC380V±10% 50Hz
Supply Voltage		AC380V±10% 50Hz
Power		24.5kW

Industry News

Remember these tips, and operating the constant temperature and humidity test chamber will be safe and simple.

The constant temperature and humidity test chamber is widely used in many industries. To reduce the failure rate and accident rate during use

What Challenges Might Be Encountered During Rain Test Chamber Testing?

Rain test chambers, also commonly referred to as waterproof test chambers or box-type rain test chambers, are primarily used to evaluate whether the casings or sealed components of electrical and electronic products, household appliances, and various lighting fixtures are affected during rain testing, and whether their operational performance and adaptability can be maintained.

How to Test the Temperature Recovery Time of a Thermal Shock Chamber

If the temperature recovery time falls outside the specified range, it can affect the test results of the thermal shock chamber. To routinely test the temperature recovery time of the equipment, you can follow the steps below.

Military Standard Rain Test Chamber