亚洲中文字幕AV在天堂,欧美日韩国产中文高清视频,中文字幕av在线

Product Parameter

Model		Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-2X1000C-LH		Room A: 1000×1000×1000 Room B: 1000×1000×1000	Approx. 2400 x 2900 x 2150

temperature range	-60℃～180℃
Temperature uniformity	≤2℃ (at no load)
Temperature fluctuation	±0.5℃(at no load)
Time setting range	1～60000M
Humidity range	20%～98% RH
Humidity uniformity	+2% -3% RH
Humidity fluctuations	±2%
Heating rate	2.0～3.0℃/min
cooling rate	1.0～2.0℃/min
?test hole	Mounted on the left/right side of the machine at ?80mm for use with external test power cables or signal cables.
Observation window	395×395mm(Effective vision)
Outer box material	High quality A3 steel plate electrostatic spraying
?Inner box material	High quality stainless steel SUS304
Insulation material	Rigid polyurethane foam + fiberglass
Temperature and humidity controller	Japan “UEC” temperature and humidity meter
Temperature and humidity sensors	Electronic sensors
Cooling method	Two-machine cascade refrigeration
compactors	BITZER Compressors
standard configuration		1 roll of wet bulb gauze, 2 sample racks, with condensate catch pan and drain out of the box
security protection		Compressor overpressure overload, over temperature, fan motor overheating, leakage protection Overload and short-circuit protection for the whole machine, under-phase/reverse-phase, timing of the whole equipment, overload and short-circuit protection.
Supply Voltage		AC380V±10% 50Hz
Power		25.5kW
operating environment		5℃～＋28℃ ≤85% RH
Note: 1、the test data are used in the ambient temperature of 25 ℃ and well ventilated conditions measured 2、Can be customized according to the specific requirements of the user non-standard AB constant temperature and humidity box etc 3、This technical information, subject to change without notice

Industry News

In-Depth Understanding of Heating Elements in High and Low Temperature Alternating Test Chambers

High and low temperature alternating test chambers are composed of many components, each playing a critical role in the operation of the equipment. Today, we will focus on the heating element, providing a deeper understanding of this essential part of the testing device.

Humidification Methods for Constant Temperature and Humidity Test Chambers

The humidification process in a constant temperature and humidity test chamber essentially involves increasing the water vapor partial pressure. The initial humidification method was to spray water onto the chamber walls and control the water temperature to regulate the saturation pressure of the water surface.

Comparison of Two Cooling Methods for Constant Temperature and Humidity Test Chambers

Cooling is a critical aspect of constant temperature and humidity test chambers. The two most common cooling methods are water-cooled (chilled water) and air-cooled. Each has its own advantages and disadvantages.

AB Constant Temperature and Humidity Box