Service Hotline
4000-662-888| Model | Studio Size? (D*W*H)mm | Dimension（D*W*H）mm | |
| LRHS-2000D(R15)-LJS | 1000×2000×1000 | Subject to contractual three-view | |
| LRHS-4000D(R15)-LJS | 2000×2000×1000 | ||
| LRHS-6000D(R15)-LJS | 2000×3000×1000 | ||
| LRHS-8000D(R15)-LJS | 2000×2000×2000 | ||
| temperature range | A：-20℃～150℃ ? ? ?B：-40℃～150℃ C：-60℃～150℃ ? ? ?D：-70℃～150℃ |
||||||
| Temperature uniformity | ≤2℃ (at no load) | ||||||
| Temperature fluctuation | ±0.5℃ (at no load) | ||||||
| Humidity range | 20%～98% RH | ||||||
| Humidity uniformity | +2% -3% RH | ||||||
| Humidity fluctuation | ±2% | ||||||
| heating rate | -55℃～125℃ Linear 15℃/min (at no load) | ||||||
| cooling rate | 125℃～-55℃ Linear 15℃/min (at no load) | ||||||
| Time Setting Range | 1～60000M | ||||||
| test hole | Mounted on the left side of the machine for use with external test power or signal cables | ||||||
| viewing window | 395 x 395mm (effective field of view) | ||||||
| Outer case material | High quality A3 steel plate electrostatic spraying | ||||||
| Inner box material | Imported high-grade stainless steel SUS304 | ||||||
| Insulation material | Rigid polyurethane foam + fiberglass | ||||||
| Temperature Controller | Imported “UEC” brand temperature and humidity meter | ||||||
| temperature sensor | PT100 platinum resistance temperature measurement body | ||||||
| Cooling method | Two-machine cascade refrigeration | ||||||
| Compressor | France Tycon/Germany Bitzer/Germany Copeland | ||||||
| standard configuration | Equipped with a condensate catch pan and discharged out of the box | ||||||
| security protection | Compressor overpressure overload, fan motor overheating, the whole machine under phase / reverse phase Timing, over temperature, leakage protection, overload and short-circuit protection |
||||||
| Supply Voltage | AC380V±10% 50Hz | ||||||
| operating environment | 5℃～＋28℃ ≤85% RH | ||||||
| Note: 1、 the model in the R represents linear, r represents non-linear, the number in parentheses represents the cooling rate 2、Test data are measured in the use of ambient temperature of 25 ℃ and well ventilated conditions 3、Above parameters are for reference only, can be customized according to user-specific test parameters 4、This technical information, subject to change without notice |
|||||||
Copyright ? 2025 Shanghai Linpin Instrument Co., Ltd Copyright
| ICP Number：Shanghai ICP Record No. 12029585-7
| Sitemap
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
<strike id="00ggy"></strike>