日本精品久久久中文字幕,中文字幕专区高清在线观看,波多野结衣在线aⅴ中文字幕不卡

Product Parameter

Model	Studio Size（DWH）mm	Dimension（DWH）mm
LRHS-170M3-LJS	10000×4880×3500	10400×5730×4230

Temperature range	-40℃～+45℃
Temperature fluctuation	≤±1°C
Temperature uniformity	≤±2°C
Heating rate	-40℃～+25℃，average rate 0.27℃/min
Cooling rate	+25℃～-40℃，average rate 0.27℃/min
Humidity range	40%~85%RH
Outer box material	High-quality cold-rolled steel plate, surface plastic spraying treatment
Inside box material	Stainless steel plate SUS304
Insulation material	Rigid polyurethane foam + glass fiber
Controller	Adopting Japan “UMC” brand temperature meter
Cooling method	Twin-combined refrigeration
Temperature and Humidity Sensor	High Accuracy Pt100 Platinum Resistance Temperature Sensors
Internal fan	35mph±10％Speed of wind through the interior of the test chamber
Safety protection	Compressor low pressure/overload/high pressure alarm, fan motor overload, overall equipment timing, short circuit, phase loss, over temperature, leakage and other protection
Supply Voltage	AC380V±10% 50Hz
Cooling method	Water Cold

Industry News

How the cryogenic test chamber achieves a stable low-temperature environment

Cold and thermal shock test chamber on the market is divided into two categories, a two-compartment type, including high-temperature region and low-temperature region, the test object were tested in two different temperatures in the area of the test, alternating hot and cold test; the other is a three-compartment type, in addition to high-temperature and low-temperature areas, there is also a test area, and the difference between the two-compartment is that the three-compartment type does not need to be tested directly in the test area.

Pay Attention to These Points to Ensure Uniformity in Your Thermal Shock Test Chamber

The uniformity of a thermal shock test chamber directly affects the test results, so it is crucial to maintain optimal uniformity.

Does the UV aging test chamber have requirements for the selection of lamps?

The UV aging test chamber is a device that simulates ultraviolet radiation and condensation climate environments by using fluorescent ultraviolet lamps as the light source.

Vehicle Testing Laboratory