For high and low temperature humidity test chambers, daily troubleshooting of abnormalities is essential. If the issue is not due to equipment damage, it can often be resolved through certain methods. There are many potential problems that may arise with the equipment, and today we will introduce some of these issues along with their corresponding solutions.
During the use of the high and low temperature humidity test chamber, if the water pipe turns yellow, it may be due to rust inside the pipe. This rust is caused by water being exposed to air for a long time and undergoing oxidation. This situation is actually normal, and the pipe can be cleaned with water. If the ambient temperature of the equipment becomes too high, the cooling speed of the equipment may slow down, which is also a normal phenomenon. During the first seven days of using the high and low temperature humidity test equipment for high-temperature testing, salt spray and odors may be emitted. This is because the steel plates used in the production of the test chamber have a small amount of lubricating oil, so when the new equipment is first used for high-temperature testing, the oil is burned, producing an odor. This is also a normal occurrence. If the test chamber experiences overpressure, it may be due to a high ambient temperature. The equipment should be placed in an environment with a room temperature between 5°C and 28°C, and the relative humidity of the installation site should be less than 85%.
The author has observed that due to a lack of in-depth understanding of the test chamber, users often perceive the above situations as abnormalities. Through the methods mentioned above, users can troubleshoot and address these issues. After today’s introduction, do you have a better understanding of this type of test chamber equipment? This equipment is used to test various performance indicators of military, automotive components, electronic products, aerospace products, and other electronic components under high temperature, low temperature, and alternating humidity environments. It is currently widely used in many industries, and users can purchase the appropriate test chamber equipment based on their actual testing needs.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
囼?yàn)箱.png)
航老化房.png)
