The compressor is a critical component of a low-temperature test chamber. Why does it sometimes fail to start? What aspects should we check?
The troubleshooting process for a low-temperature test chamber compressor that fails to start should begin with an electrical circuit inspection. First, check if there is an issue with the motor circuit connection. If the problem lies in the equipment’s circuit, inspect the motor circuit connection points to determine if poor connections are the cause. Immediate fault diagnosis and repair are necessary.
Additionally, check if the power supply voltage is too low. If the grid voltage is insufficient, wait for it to return to normal levels before attempting to start the compressor.
Another factor to consider is whether the exhaust valve is leaking. If the exhaust valve is damaged or improperly sealed, it can cause excessive pressure in the crankcase, preventing the compressor from starting. In this case, the exhaust valve and sealing components need to be replaced.
Malfunctions in the energy regulation mechanism can also cause the compressor to fail to start. This requires checking the oil supply pipeline for blockages, low pressure, or stuck oil pistons. If any faults are detected, they should be addressed promptly.
Pressure relays and temperature controllers should also be inspected. If the issue lies with the pressure relay, the set pressure parameters may need adjustment. If the temperature controller is malfunctioning, it should be recalibrated or replaced if damaged. In such cases, it is advisable to contact the manufacturer’s technical support for repair or replacement.
Low-temperature test chambers are widely used in industries such as aerospace, military, construction materials, scientific research, and electronics. As a result, many clients in these industries purchase them. Linpin Instruments is a manufacturer of low-temperature test chambers and can design and produce equipment based on customer requirements. The equipment is provided directly by the manufacturer, offering more competitive prices. The manufacturer also provides delivery, technical support, and other services to ensure comprehensive customer satisfaction. For inquiries, please call 4000-662-888 to learn more about the equipment.
Temperature and humidity test chamber Salt spray test chamber Aging test chamber New Energy Test Chamber IP protection testing equipment Non standard customized laboratory High and Low Temperature Test Chamber Thermal Shock Test Chamber Constant Temperature and Humidity Test Chamber High and Low Temperature Low Pressure Test Chamber Salt Spray Test Chamber Rapid Temperature Change Test Chamber High and Low Temperature Alternating Humidity Test Chamber High and Low Temperature Humidity Test Chamber Low Temperature Test Chamber High Temperature Test Chamber High and Low Temperature Alternating Test Chamber Damp heat test chamber for antirust oil and grease UV Aging Test Chamber Ozone Aging Test Chamber Air-exchange Aging Test Chamber Rain Test Chamber Sand and Dust Test Chamber Sulfur Dioxide Test Chamber Mold Test Chamber Ultra-Low Temperature Test Chamber Salt Spray Corrosion Test Chamber Condensation Test Chamber HAST Test Chamber Thermal Vacuum Test Chamber Battery Explosion-proof Test Chamber battery test chamber Photovoltaic PV module UV test chamber Sunlight simulation test chamber Photovoltaic wet freezing test chamber Photovoltaic Dustproof Test Chamber
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
