手机精品视频在线,久在线观看视频,国产视频在线视频

Product Parameter

Model	Studio Size? (DWH)mm	Dimension（DWH）mm
LRHS-672-NGF	700×800×1200	1030×1580×2150

light source drive	EPS
Effective irradiance area	800mm×700mm
Distance of light source from test surface	1000±200mm
Light source power	2000W/lamp
Number of light sources	1PCS
Light intensity range	150～250W/m2
spectral range	280～320nm 320～400nm
UVB/(UVA+UVB)	5 to 8%
inhomogeneity	≤10%
UVC Content	（Ratio of integrated irradiance in the wavelength range (250-280) nm to integrated irradiance in the wavelength range (250-400) nm of UVC content ≤1%.
Sample temperature range	60～70℃ (customized water-cooled structure for cell carrier table)
Sample temperature deviation	≤±2℃
Chamber temperature range	20～80℃
Box temperature fluctuation	≤1℃
Outer case material	1.2mm Cold rolled steel plate with plastic spraying on both sides
Inner box material	1.0mm thick SUS304 stainless steel, sunlight simulating fully reflective reflective film mounted on the side wall for secondary sealing and optical reflection control.
Insulation material	10mm Thickness High Quality Insulation Material
Controller	Siemens PLC Module + Touch Screen
Cooling method	Air-cooled refrigeration
Compressor	Taikang, France
Heating method	Nickel-chromium alloy electric wire type heater
light source	Holler lamp, metal halide wick, European brand. Warranty time of the light source 2000 hours, the actual use of time greater than or equal to 3000 hours
irradiance meter	Alberdi Brands
security protection	Emergency stop button, sample surface temperature is too high, light source system fault alarm, power supply phase/undervoltage/overvoltage/leakage protection, fan overload, compressor overvoltage/overheat/overcurrent, heating wire over-temperature protection
Supply Voltage	Voltage: 3/N/PE AC 400V±10% 50Hz Rated current: 30A
Power	20.0kW
operating environment	10℃～＋35℃ ? ?? ≤75% RH
Note: 1、 the above data are measured in the use of ambient temperature of 25 ℃ and well-ventilated conditions 2、Can be customized according to the specific requirements of the user non-standard uv aging simulation test chamber etc 3、This technical information is subject to change without prior notice.

Industry News

A Deep Analysis of the HAST Test Chamber

The HAST test chamber simulates extreme environments to accelerate the reliability and durability testing of electronic, automotive, and other products. It helps enterprises identify potential problems in advance and enhance their market competitiveness.

Factors Affecting the Lifespan of a Cold and Hot Shock Test Chamber

Cold and hot shock test chambers are widely used in various industries such as automotive parts, communications, plastics, aerospace, chemical materials, LED, and electronic testing.

Key Factors Causing Errors in Salt Spray Test Chambers

Salt spray test chambers evaluate the corrosion resistance of samples by exposing them to a corrosive salt mist, allowing comparison with other products. These tests can be categorized into three types

免费无码中文字幕A级毛片_人妻少妇久久中文字幕一区二区_亚洲乱码中文字幕综合_亚洲va中文字幕无码久久

UV Aging Simulation Test Chamber