Service Hotline
4000-662-888
Product application:
Elevated drip test equipment is suitable for external lighting and signal devices and automobile lamp shell protection.
Compliance with standards:
GB10485-89 GB4208-93 GB/T4942
Chamber structure:
The elevated drip test equipment is made of stainless steel, which has good corrosion resistance, good appearance gloss and good anti-oxygen effect at high temperature.
The equipment should have a height-adjustable bracket. Once raised to the desired height, it should be secured with screws. To lower it, simply loosen the screws. When the customer raises the upper part of the bracket during installation, a forklift capable of lifting to a height exceeding 4 meters will be used.
Control system:
Adjust the pressure with a flowmeter.
The lifting drip test equipment adopts imported frequency converter to control the speed, which effectively ensures the test to run according to the standard. Equipped with water filter
Equipment Operation
Installation Site: The equipment will be placed in a special test laboratory for testing and then moved and stored in different locations.
The test laboratory has a step that is 300 mm above the ground. The door is over 3 meters high and 6 meters wide.
After the drip test is completed, the equipment will be moved outside the laboratory, and the total height of the bracket when lowered should not exceed 3 meters.
Water Source: Clean local tap water.
Water Tank Design: There is a water inlet and an outlet at the back, each connected to a 3/8” pipe. The adjustable scale should be at least 1.5 meters.
Total Power: 1.3 kW.
Power Supply Specifications: AC 220V ±10%, 50 ±0.5 Hz (single-phase three-wire system).
| Pseudolaric acid | Elevated drip test equipment | |
| Dimension（D*W*H）mm | 1850×250×1850 （D*W*H）mm | |
| Spraying aperture | ?0.4mm | ||||||
| Distance between holes | 20mm×20mm | ||||||
| Drip tank height range | 200～2000mm可調(diào) | ||||||
| quantity of rainfall | 1～3mm/min | ||||||
| drip area | 800mm×1000mm | ||||||
| Drip tank height | 250mm | ||||||
| Test bench size | 0.7～1.0℃/min | ||||||
| Test Stand Angle | 15°～45°Adjustable (based on vertical orientation) | ||||||
| water for rain | 15°～45°Adjustable (based on vertical orientation) | ||||||
| Time Setting Range | 1～9999H | ||||||
| Temperature Controller | “Taiwan Weilun” touch screen + ‘Germany Siemens’ PLC module | ||||||
| Worktop Material | Aluminum | ||||||
| drip tank | Water level regulating supply tank, forklift lift with flow meter | ||||||
| Sink Materials | 20mm acrylic panels, arranged in a square array of 20 x 20, for easy leveling. | ||||||
| security protection | Motor overload, equipment timing, leakage, short circuit, automatic shutdown after fault alarms | ||||||
| Supply Voltage | AC220V±10% 50Hz | ||||||
| Note: 1、 the data are in the use of ambient temperature of 25 ℃ and well-ventilated conditions measured 2、The above parameters are for reference only, and can be customized according to user-specific test parameters. 3、This technical information is subject to change without prior notice. |
|||||||
Copyright ? 2025 Shanghai Linpin Instrument Co., Ltd Copyright
| ICP Number：Shanghai ICP Record No. 12029585-7
| Sitemap
EN
中文
Pусский
Ti?ng Vi?t
???????
???????? ????
箱.png)
<strike id="00ggy"></strike>