Structural Features of High-Temperature Test Chambers

Source：LINPIN Time：2025-05-16 Category：Industry News

High-temperature test chambers are widely used in environmental testing industries. Below are the key structural characteristics of these devices:

1. Mobility & Observation
Equipped with 4 swivel casters (two with locking function) for easy movement and stability.
Features a multi-layer tempered glass observation window for real-time monitoring of test samples.
2. Chamber Construction
Stainless steel interior (chamber and accessories) ensures durability and extended service life.
Sealed chamber design maintains precise temperature control (±2% deviation, ±1°C fluctuation).
3. Safety Protection
Built-in safety alarms for:
Over-temperature protection
Fan motor overheating
Electrical leakage & short circuits
Automatic shutdown if temperature exceeds limits to prevent accidents.

High-temperature test chambers
4. Insulation System
High-density ultra-fine glass fiber insulation (12cm thickness) ensures:
Stable internal temperature
Minimal heat transfer to the exterior
Protection against external temperature interference
5. High-Temperature Sealing
Self-adhesive, high-tension silicone sealing strips withstand extreme heat while maintaining an airtight seal.
6. Air Circulation System
Long-shaft fan motor + stainless steel multi-blade impeller (resistant to high/low temperatures).
Ensures vertical convection airflow for uniform and stable temperature distribution.
7. External Wiring Access
Cable ports allow external power/signal connections.
Number of ports can be customized based on testing requirements.
8. Temperature Regulation
Dedicated air duct system includes:
Heating elements
Temperature inlet/outlet vents
Circulation fan
These structural features ensure precision, safety, and reliability in high-temperature testing. For more details, visit Linpin’s official website.

Previous article: FAQs: How Often Should Components of a Formaldehyde/VOC Environmental Test Chamber Be Replaced?

Next article: Brief Introduction: Temperature and Humidity Requirements for the Three Processes of a Sand and Dust Test Chamber

News Recommendation

25.04

Can You Choose a Three-Chamber Thermal Shock Test Chamber?

In the market, thermal shock test chambers come in two types: two-chamber and three-chamber designs. Some customers may wonder which type to choose—can they opt for a three-chamber model?

25.05

Materials Unsuitable for Thermal Shock Testing Chambers

Thermal shock testing chambers are used to evaluate how materials perform under rapid, extreme temperature changes (from very high to very low temperatures in seconds). These chambers are widely used in industries such as electronics, plastics, and metals to test thermal expansion and contraction effects.

25.03

Why Does the Compressor of a Low-Temperature Test Chamber Fail to Start?

The compressor is a critical component of a low-temperature test chamber.

25.03

Key Points to Remember Before Installing a Salt Spray Test Chamber

As a large, high-precision environmental simulation testing instrument, the salt spray test chamber requires careful attention during installation to ensure its proper operation and accurate testing.

25.04

The Impact of Sand and Dust Test Chamber Selection on Equipment Operating Costs

Conducting tests on specimens using sand and dust test chamber equipment incurs certain costs. One of the most critical factors influencing the cost of specimen testing is the selection of the testing equipment. How does the specific equipment affect operating costs?