What to Do When the Circulating Water Pressure in a Thermal Shock Test Chamber is Insufficient?

Source：LINPIN Time：2025-04-14 Category：Industry News

If you find that the circulating water pressure in your thermal shock test chamber is insufficient, how should you resolve it? To address the issue at its root and prevent recurrence, we need to promptly identify and troubleshoot the problem based on the actual situation.

Step-by-Step Troubleshooting Guide:
Check the Circulating Water Indicator Light on the Display Panel

If the indicator light is flashing, it typically means there was a previous issue with the cooling water tower (e.g., power failure, malfunction in the water replenishment system, or the water inlet system not being activated). However, if the issue has already been resolved but the light remains flashing, further inspection is needed.

Thermal Shock Test Chamber
If the Indicator Light is Solid Red (Not Flashing)

This suggests a current problem requiring immediate troubleshooting. Possible causes include:
Cooling water tower malfunction
Water pump failure
Power supply interruption
Inspection Steps:
Check if the cooling water tower’s power is off → If so, turn it back on.
Verify if there is water in the cooling tower → If empty, ensure the water inlet valve is open and the system is functioning properly.
Examine the water pump (motor) → If the pump does not operate even when powered, it may be damaged and require repair or replacement.
Temporary Fix vs. Professional Assistance
The above methods allow operators to troubleshoot basic issues (though not as precisely as professionals).
If the problem persists after these steps, it’s best to contact the manufacturer’s technical support for further diagnosis and repair.
Our Support Services
As a decades-long manufacturer of testing equipment, we provide:
? Various test chamber models
? Technical support & solutions
? Expert troubleshooting assistance

For technical inquiries, call us at 400-066-2888. Our engineers will help you resolve the issue efficiently.

Previous article: How to Better Protect the Nozzle of a Salt Spray Test Chamber?

Next article: Have You Mastered the Correct Usage of the Temperature Test Chamber?

News Recommendation

25.03

How to Detect Leaks in a Temperature Cycling Test Chamber

Previously, we have discussed many technical aspects of temperature cycling test chambers. Today, we will share methods for detecting leaks in these chambers. Specifically, there are four main approaches to check for leaks.

25.03

What Should Be Considered to Ensure the Smooth Operation of a Constant Temperature and Humidity Test Chamber?

By subjecting products to various temperature environments—such as high temperature, low temperature, and alternating humidity—constant temperature and humidity test chambers can evaluate the heat resistance, cold resistance, dryness resistance, and moisture resistance of materials under different climatic conditions.

25.03

Are You Maintaining Your Constant Temperature and Humidity Test Chamber Correctly?

If a constant temperature and humidity test chamber malfunctions due to improper operation or lack of maintenance, it will not only affect the progress of work but also incur costs much higher than those of regular maintenance.

25.03

How to Solve the Problem of Refrigerant Leakage in Low-Temperature Test Chambers?

Low-temperature test chambers are widely used in fields such as aerospace, automotive, home appliances, and scientific research.

24.07

The birth of the linear 20℃ degree fast temperature change tester

Enterprises should pay attention to both the needs of users, but also to pay attention to competitors, and strive to find a balance between user needs and competitors marketing concept, known as “market-oriented”, the core of which is from the user's needs Adhere to the market orientation, the pulse of the user, the foothold and the destination point on the basis of the product “sell”, based on the concept, LF Instruments positive development of 20 ℃/min fast temperature change test chamber and successfully introduced to the market. Based on this concept, LF Instruments has developed a 20℃/min fast temperature change tester and successfully introduced it to the market.